{"product_id":"apc-0u-pdu-toolless-mounting-pegs-replacement-peg-buttons-made-in-usa-screws-included","title":"0U PDU Mounting Peg Buttons for APC, Replacement with Screws, Made in USA","description":"\u003cp\u003e\u003cstrong\u003eRestore any APC 0U rack PDU to its rack in seconds.\u003c\/strong\u003e These replacement mounting peg buttons are a direct fit for the APC 0U PDU keyhole mount, with a 25 mm head, a 13.5 mm shoulder, and a 7 mm overall height that matches the original APC peg. Printed to order in the USA by DC Additive Pros, and every pair ships with the mounting screws.\u003c\/p\u003e\n\u003cp\u003eHow it works: attach each peg to your PDU with the included M4 screw, then the PDU hangs on the enclosure keyhole slots with no tools. These pegs are the replacement for APC's discontinued mounting hardware.\u003c\/p\u003e\n\u003cp\u003eThe pegs are almost always lost when a 0U PDU is redeployed or bought used. This is the exact part you need to hang the PDU again, without buying a whole new cable channel or bracket kit.\u003c\/p\u003e\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMade to order in tough ABS, printed in the United States\u003c\/li\u003e\n\u003cli\u003eTwo M4 x 10 mm flat head machine screws included per pair\u003c\/li\u003e\n\u003cli\u003eHead 25 mm diameter, shoulder 13.5 mm diameter, 7 mm tall\u003c\/li\u003e\n\u003cli\u003eDirect fit to the standard APC 0U PDU keyhole mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eCompatible with APC 0U Rack PDUs across the AP7500, AP7800, and AP7900 series, and the AP8400, AP8600, AP8800, and AP8900 Rack PDU 2G series. Verified model references include AP7530, AP7532, AP7540, AP7830, AP7840, AP7841, AP7862, AP7863, AP7864, AP7866, AP7866A, AP7867, AP7893, AP7930, AP7931, AP7932, AP7940, AP7941, AP7960, AP7961, AP7990, and AP7991. If your model is not listed, send us the number and we will confirm fitment.\u003c\/p\u003e\n\u003ch3\u003eMaterial notes\u003c\/h3\u003e\n\u003cp\u003eABS is rated for continuous rack interior temperatures up to 80 C, which covers normal cold aisle and hot aisle conditions.\u003c\/p\u003e\n\u003ch3\u003ePack sizes\u003c\/h3\u003e\n\u003cp\u003eChoose a 2 pack for a single PDU, a 4 pack for two PDUs, or a 12 pack that mounts six PDUs and lowers your cost per peg for refurbishers and MSPs.\u003c\/p\u003e\n\u003ch3\u003eBulk and custom orders\u003c\/h3\u003e\n\u003cp\u003eNeed more than a dozen? We supply the standard peg in 24, 50, and 100 count boxes for refurbishers, MSPs, and data center operators. Contact us for bulk pricing.\u003c\/p\u003e\n\u003cp\u003eWe also print custom work, including other APC models, other PDU brands, and nonstandard peg sizes. Custom geometry is made to order in bulk only, with a 25 piece minimum, because each custom run requires setup and engineering time. Send us your part and quantity for a quote.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat replaces the discontinued APC toolless mounting pegs?\u003c\/strong\u003e\u003cbr\u003eThese pegs are a direct replacement for the APC 0U PDU mounting buttons that APC discontinued. Attach the peg to the PDU with a standard M4 x 10 mm screw into the rear insert, then the PDU drops into the enclosure keyhole slots.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size are APC PDU mounting pegs?\u003c\/strong\u003e\u003cbr\u003eThe head is 25 mm in diameter and 2.8 mm thick, the shoulder is 13.5 mm in diameter, and overall height is 7 mm, matching the original APC disc peg.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo these fit AP8000 series PDUs?\u003c\/strong\u003e\u003cbr\u003eYes. The same peg fits the APC AP7500, AP7800, and AP7900 series plus the AP8400, AP8600, AP8800, and AP8900 Rack PDU 2G series, because they share the same M4 insert and keyhole mount.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the screws included?\u003c\/strong\u003e\u003cbr\u003eYes. Every pair ships with two M4 x 10 mm flat head machine screws.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you offer bulk or custom orders?\u003c\/strong\u003e\u003cbr\u003eYes. Bulk quantities of the standard peg are available in 24, 50, and 100 count boxes, contact us for pricing. Custom sizes, other PDU brands, and nonstandard geometry are made to order in bulk only, with a 25 piece minimum, because each custom run takes setup and engineering time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere are these made?\u003c\/strong\u003e\u003cbr\u003eEvery peg is 3D printed to order in the United States by DC Additive Pros.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCompatible with APC brand PDUs. DC Additive Pros is not affiliated with, authorized by, or endorsed by Schneider Electric or APC. APC and NetShelter and all model numbers are trademarks of their respective owners, referenced here only to indicate fitment.\u003c\/em\u003e\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What replaces the discontinued APC toolless mounting pegs?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"These pegs are a direct replacement for the APC 0U PDU mounting buttons that APC discontinued. Attach the peg to the PDU with a standard M4 x 10 mm screw into the rear insert, then the PDU drops into the enclosure keyhole slots.\"}},{\"@type\":\"Question\",\"name\":\"What size are APC PDU mounting pegs?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The head is 25 mm in diameter and 2.8 mm thick, the shoulder is 13.5 mm in diameter, and overall height is 7 mm, matching the original APC disc peg.\"}},{\"@type\":\"Question\",\"name\":\"Do these fit AP8000 series PDUs?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. The same peg fits the APC AP7500, AP7800, and AP7900 series plus the AP8400, AP8600, AP8800, and AP8900 Rack PDU 2G series, because they share the same M4 insert and keyhole mount.\"}},{\"@type\":\"Question\",\"name\":\"Are the screws included?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. Every pair ships with two M4 x 10 mm flat head machine screws.\"}},{\"@type\":\"Question\",\"name\":\"Where are these made?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Every peg is 3D printed to order in the United States by DC Additive Pros.\"}}]}\u003c\/script\u003e","brand":"DC Additive Pros","offers":[{"title":"2 Pack (1 PDU)","offer_id":52879394046233,"sku":"DCAP-APCPEG-2PK","price":12.99,"currency_code":"USD","in_stock":true},{"title":"4 Pack (2 PDUs)","offer_id":52879394079001,"sku":"DCAP-APCPEG-4PK","price":19.99,"currency_code":"USD","in_stock":true},{"title":"12 Pack (6 PDUs)","offer_id":52879394111769,"sku":"DCAP-APCPEG-12PK","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0990\/9983\/6697\/files\/IMG_4111.jpg?v=1784838274","url":"https:\/\/dcadditivepros.com\/products\/apc-0u-pdu-toolless-mounting-pegs-replacement-peg-buttons-made-in-usa-screws-included","provider":"DC Additive Pros","version":"1.0","type":"link"}