0U PDU Mounting Peg Buttons for APC, Replacement with Screws, Made in USA

Restore any APC 0U rack PDU to its rack in seconds. These replacement mounting peg buttons are a direct fit for the APC 0U PDU keyhole mount, with a 25 mm head, a 13.5 mm shoulder, and a 7 mm overall height that matches the original APC peg. Printed to order in the USA by DC Additive Pros, and every pair ships with the mounting screws.

How it works: attach each peg to your PDU with the included M4 screw, then the PDU hangs on the enclosure keyhole slots with no tools. These pegs are the replacement for APC's discontinued mounting hardware.

The pegs are almost always lost when a 0U PDU is redeployed or bought used. This is the exact part you need to hang the PDU again, without buying a whole new cable channel or bracket kit.

What you get

• Made to order in tough ABS, printed in the United States
• Two M4 x 10 mm flat head machine screws included per pair
• Head 25 mm diameter, shoulder 13.5 mm diameter, 7 mm tall
• Direct fit to the standard APC 0U PDU keyhole mount

Compatibility

Compatible with APC 0U Rack PDUs across the AP7500, AP7800, and AP7900 series, and the AP8400, AP8600, AP8800, and AP8900 Rack PDU 2G series. Verified model references include AP7530, AP7532, AP7540, AP7830, AP7840, AP7841, AP7862, AP7863, AP7864, AP7866, AP7866A, AP7867, AP7893, AP7930, AP7931, AP7932, AP7940, AP7941, AP7960, AP7961, AP7990, and AP7991. If your model is not listed, send us the number and we will confirm fitment.

Material notes

ABS is rated for continuous rack interior temperatures up to 80 C, which covers normal cold aisle and hot aisle conditions.

Pack sizes

Choose a 2 pack for a single PDU, a 4 pack for two PDUs, or a 12 pack that mounts six PDUs and lowers your cost per peg for refurbishers and MSPs.

Bulk and custom orders

Need more than a dozen? We supply the standard peg in 24, 50, and 100 count boxes for refurbishers, MSPs, and data center operators. Contact us for bulk pricing.

We also print custom work, including other APC models, other PDU brands, and nonstandard peg sizes. Custom geometry is made to order in bulk only, with a 25 piece minimum, because each custom run requires setup and engineering time. Send us your part and quantity for a quote.

Frequently asked questions

What replaces the discontinued APC toolless mounting pegs?
These pegs are a direct replacement for the APC 0U PDU mounting buttons that APC discontinued. Attach the peg to the PDU with a standard M4 x 10 mm screw into the rear insert, then the PDU drops into the enclosure keyhole slots.

What size are APC PDU mounting pegs?
The head is 25 mm in diameter and 2.8 mm thick, the shoulder is 13.5 mm in diameter, and overall height is 7 mm, matching the original APC disc peg.

Do these fit AP8000 series PDUs?
Yes. The same peg fits the APC AP7500, AP7800, and AP7900 series plus the AP8400, AP8600, AP8800, and AP8900 Rack PDU 2G series, because they share the same M4 insert and keyhole mount.

Are the screws included?
Yes. Every pair ships with two M4 x 10 mm flat head machine screws.

Do you offer bulk or custom orders?
Yes. Bulk quantities of the standard peg are available in 24, 50, and 100 count boxes, contact us for pricing. Custom sizes, other PDU brands, and nonstandard geometry are made to order in bulk only, with a 25 piece minimum, because each custom run takes setup and engineering time.

Where are these made?
Every peg is 3D printed to order in the United States by DC Additive Pros.

Compatible with APC brand PDUs. DC Additive Pros is not affiliated with, authorized by, or endorsed by Schneider Electric or APC. APC and NetShelter and all model numbers are trademarks of their respective owners, referenced here only to indicate fitment.